After filling out the form, we contact you within 5 minutes!
from €25

Trap replacement in Riga

Trap replacement is needed when it drips under the sink or bath, a sewage smell comes from the drain, or the old trap is cracked and clogged. We replace bathroom and kitchen sink traps, bath and shower tray traps, if needed with a branch for a washing machine or dishwasher. Replacing one trap costs from €25, and we agree the price before the work starts.

\\u26a1 Reply in 5 min \u2713 No hidden fees \ud83d\udd27 No wall breaking
Book a Service
Illustration: unscrewing a sink trap

Why a trap smells or leaks

A trap is a bent pipe with a water seal. The water that stays in the bend stops sewer air from entering the room. If the drain smells, the water seal is usually gone or the trap is no longer airtight.

Leaks have other causes. Most often it is a cracked plastic body or nut, a worn cone seal at the sink waste, a stretched or kinked flexible pipe, or a trap of the wrong diameter fitted to the drain with a makeshift adapter.

If the smell remains even after replacing the trap, the cause may be in the riser or the drain ventilation. Then see the sewage smell page.

Drawing: a bottle trap and the water seal that keeps sewer smell out
Drawing: a bottle trap and the water seal that keeps sewer smell out.

Sink, bath, shower and washing machine traps

For connecting the machine to the water supply and moving it, see the washing machine and dishwasher connection page. If you are replacing the whole sink, not just the trap, sink installation is the better fit.

How trap replacement works

  1. 1

    Checking the cause

    We find out whether the trap itself is leaking, the joint with the sink or the transition to the drain, and whether the drain is blocked further down the pipe.

  2. 2

    Removing the old trap

    The old trap is unscrewed, the old seal or flexible pipe is taken out of the drain opening, and the waste and opening are cleaned.

  3. 3

    Matching the sizes

    The new trap has to match the sink or bath waste and the drain pipe, usually 40 or 50 mm. If the sizes do not match, a factory adapter is used, not tape or silicone.

  4. 4

    Installation

    The new trap is fitted with new seals and, if needed, a branch for the machine. Plastic nuts are tightened by hand so the body does not crack.

  5. 5

    Testing with water

    The sink or bath is filled and emptied at full flow, so the joints are checked under load.

How much does trap replacement cost?

JobPriceNote
Trap replacementfrom €25for 1 trap: sink, kitchen sink, bath or shower tray

The price depends on:

The price does not include the trap itself and adapters, removing and restoring a tiled bath panel, or clearing a blockage further down the pipe. If the water still does not drain with a new trap, you need drain cleaning.

If the call-out is for just one trap, the total price may be higher than the starting price. So it is worth replacing other old traps at the same time or fixing a dripping tap: faucet repair from €25. All jobs are on the plumbing services page.

ServicePriceNotes
Trap replacementfrom €25for 1 trap; trap and adapters extra

Frequently asked questions

Prepared by Santehniķis Rīgā · Page updated 05.11.2026

Other jobs in this group: toilet and bathroom

All services in this group

Book a Service Call

After submitting the form, we'll contact you within 5 minutes!

⚡

Submit the form - we'll call you within 5 minutes!

By submitting, you agree to our privacy policy

Book Now